Vogue 1191 completed

Here is the finished dress. It does work in this print I think, I did shorten the hem by about 4 inches and I had to cut the sleeves slightly shorter (I am wearing them pushed up a bit in the photo below) so I am now wondering if I will be able to squeeze another version or 2 out of some plain jerseys I have in the stash. Even if I can't, I am definitely going to make this dress again and if that means a fabric shopping trip so be it!

To answer a couple of queries from earlier posts;

Marking jersey - I am very old school when it comes to marking fabric and for all internal markings I use tailor tacks. I like knowing that I can use this on any type of fabric and that I will be able to see the markings from both sides. The downside of course is that it is slower than other methods. For markings on a seamline or for ends of darts I just clip into the edge of the fabric in the seam allowance.

The waist facing - I found that this was necessary after all - as well as covering up all the pleats and giving a smooth neat finish on the inside, it gives something for the pleated skirt front to anchor to, leaving the twist part free. At least I think that is what's happening! In any case I recommend adding it in even though it seems like there are is too much fabric in the front twist already.

Back waist facing

Front waist facing